{"title":"filaments","description":"","products":[{"product_id":"pla-black-pro-1-75-mm-1","title":"PLA Black Pro – 1.75 mm","description":"\u003ch3\u003ePLA Black Pro – 1.75 mm\u003c\/h3\u003e\n\u003cp\u003ePLA Black Pro is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\n\u003cp\u003eIt is a thermoplastic polymer based on corn. This is the most widely used material in the industry, environmentally friendly and biodegradable. It is the preferred material because it allows easier post-processing.\u003c\/p\u003e\n\u003cp\u003ePLA is rigid but brittle.\u003c\/p\u003e\n\u003cp\u003eIn outdoor conditions, corners may sometimes deform (depending on thickness and temperature). If a full finishing is applied (such as automotive-grade coating), it can become suitable for outdoor use.\u003c\/p\u003e\n\u003cp\u003eThe additives in PLA PRO \/ PLA+ \/ Tough PLA (these terms are similar) make the material about 10°C more heat-resistant and less brittle compared to standard PLA.\u003c\/p\u003e\n\u003cp\u003eThe more natural or pure the PLA (less synthetic), the weaker it is. It may be better for the environment but not for strength.\u003c\/p\u003e\n\u003ch4\u003ePrinting Temperature – PLA Black\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle (lower thermal conductivity), increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), it is recommended to add glue and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891722404061,"sku":"PLA-PRO-BLACK-175","price":80.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/2.png?v=1778169356"},{"product_id":"silk-pla-gold-1-75-mm","title":"Silk PLA Gold – 1.75 mm","description":"\u003ch3\u003eSilk PLA Gold – 1.75 mm\u003c\/h3\u003e\u003cp\u003eSilk PLA Gold is a PLA-based decorative filament with a glossy, silk-like finish. It is intended for visual and model prints, not for functional or load-bearing parts. The material is softer than standard PLA, which makes support removal noticeably easier — though it is also slightly more brittle.\u003c\/p\u003e\u003cp\u003eThe finish comes out beautifully straight off the printer, with no post-processing required. If you need a stronger material that can be sanded and finished, use PLA Pro instead.\u003c\/p\u003e\u003cp\u003eIdeal for vases, cups, jewelry, home decorations, character figures, and any model where a smooth, shimmering surface is desired without visible layer lines.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – Silk PLA Gold\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle: 200°C (up to 210°C on very fast printers) — typically about 10°C lower than PLA Pro\u003c\/li\u003e\n\u003cli\u003eBed: 60°C\u003c\/li\u003e\n\u003cli\u003eSlower print speeds are recommended in most cases\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStorage\u003c\/h4\u003e\u003cp\u003eThe spool ships vacuum-sealed with a desiccant. Once opened, store the filament in a sealed container with a desiccant. Silk PLA absorbs moisture readily — once damp it becomes brittle, hard to print, and the surface quality suffers.\u003c\/p\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891722436829,"sku":"PLA-SILK-GOLD-175","price":0.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/1-2.png?v=1778169360"},{"product_id":"pla-white-pro-1-75-mm","title":"PLA White Pro – 1.75 mm","description":"\u003ch3\u003ePLA White Pro – 1.75 mm\u003c\/h3\u003e\u003cp\u003eWhite PLA Pro is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — the most widely used material in the industry, environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003cp\u003eThe additives in PLA PRO \/ PLA+ \/ Tough PLA make the material about 10°C more heat-resistant and less brittle compared to standard PLA.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA White\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle (lower thermal conductivity), increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891727188189,"sku":"PLA-PRO-WHITE-175","price":80.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/18_ec503964-203a-4d21-b3ea-a84a02dfbb10.png?v=1778169690"},{"product_id":"pla-gray-pro-1-75-mm","title":"PLA Gray Pro – 1.75 mm","description":"\u003ch3\u003ePLA Gray Pro – 1.75 mm\u003c\/h3\u003e\u003cp\u003eGray PLA Pro is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — the most widely used material in the industry, environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003cp\u003eThe additives in PLA PRO \/ PLA+ \/ Tough PLA make the material about 10°C more heat-resistant and less brittle compared to standard PLA.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Gray\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891727646941,"sku":"PLA-PRO-GRAY-175","price":80.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/5.png?v=1778169696"},{"product_id":"pla-natural-pro-1-75-mm","title":"PLA Natural Pro – 1.75 mm","description":"\u003ch3\u003ePLA Natural Pro – 1.75 mm\u003c\/h3\u003e\u003cp\u003eNatural PLA Pro (un-pigmented \/ off-white) is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — the most widely used material in the industry, environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003cp\u003eThe additives in PLA PRO \/ PLA+ \/ Tough PLA make the material about 10°C more heat-resistant and less brittle compared to standard PLA.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Natural\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891727712477,"sku":"PLA-PRO-NATURAL-175","price":80.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/10.png?v=1778169702"},{"product_id":"pla-blue-pro-1-75-mm","title":"PLA Blue Pro – 1.75 mm","description":"\u003ch3\u003ePLA Blue Pro – 1.75 mm\u003c\/h3\u003e\u003cp\u003eBlue PLA Pro is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — the most widely used material in the industry, environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003cp\u003eThe additives in PLA PRO \/ PLA+ \/ Tough PLA make the material about 10°C more heat-resistant and less brittle compared to standard PLA.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Blue\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891727745245,"sku":"PLA-PRO-BLUE-175","price":80.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/Transparent-blue-1kg.jpg?v=1778169707"},{"product_id":"pla-yellow-pro-1-75-mm","title":"PLA Yellow Pro – 1.75 mm","description":"\u003ch3\u003ePLA Yellow Pro – 1.75 mm\u003c\/h3\u003e\u003cp\u003eYellow PLA Pro is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — the most widely used material in the industry, environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003cp\u003eThe additives in PLA PRO \/ PLA+ \/ Tough PLA make the material about 10°C more heat-resistant and less brittle compared to standard PLA.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Yellow\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891727778013,"sku":"PLA-PRO-YELLOW-175","price":80.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/19.png?v=1778169713"},{"product_id":"pla-light-blue-pro-1-75-mm","title":"PLA Light Blue Pro – 1.75 mm","description":"\u003ch3\u003ePLA Light Blue Pro – 1.75 mm\u003c\/h3\u003e\u003cp\u003eLight Blue PLA Pro is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — the most widely used material in the industry, environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003cp\u003eThe additives in PLA PRO \/ PLA+ \/ Tough PLA make the material about 10°C more heat-resistant and less brittle compared to standard PLA.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Light Blue\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891727810781,"sku":"PLA-PRO-LIGHTBLUE-175","price":80.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/6.png?v=1778169718"},{"product_id":"pla-light-wood-1-75-mm","title":"PLA Light Wood – 1.75 mm","description":"\u003ch3\u003ePLA Light Wood – 1.75 mm\u003c\/h3\u003e\u003cp\u003eLight Wood PLA is a PLA blend infused with real wood fiber that prints with a natural wood-like color, texture, and even a faint wood smell. It can be sanded, stained, and finished much like real wood, making it ideal for decorative pieces, models, and furniture-style prints. Like all PLA, it is not suitable for prolonged outdoor exposure without a protective coating.\u003c\/p\u003e\u003cp\u003eThe base resin is a thermoplastic polymer derived from corn — environmentally friendly and biodegradable. The wood fibers are mildly abrasive: a hardened or steel nozzle is recommended for long print runs, and a slightly larger nozzle (≥0.4 mm) helps avoid clogging.\u003c\/p\u003e\u003cp\u003eWood PLA is rigid but brittle, with a matte finish that hides layer lines well.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – Light Wood PLA\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 190–220°C (recommended 200°C)\u003c\/li\u003e\n\u003cli\u003eBed temperature: 50–60°C\u003c\/li\u003e\n\u003cli\u003eHardened steel nozzle recommended; ≥0.4 mm preferred to avoid clogs\u003c\/li\u003e\n\u003cli\u003eVary nozzle temp slightly during the print for natural wood-grain shading\u003c\/li\u003e\n\u003cli\u003ePrint speed: slightly slower than standard PLA\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891727876317,"sku":"PLA-WOOD-LIGHT-175","price":0.0,"currency_code":"ILS","in_stock":true}]},{"product_id":"pla-orange-pro-1-75-mm-1","title":"PLA Orange Pro – 1.75 mm","description":"\u003ch3\u003ePLA Orange Pro – 1.75 mm\u003c\/h3\u003e\u003cp\u003eOrange PLA Pro is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — the most widely used material in the industry, environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003cp\u003eThe additives in PLA PRO \/ PLA+ \/ Tough PLA make the material about 10°C more heat-resistant and less brittle compared to standard PLA.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Orange\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891727909085,"sku":"PLA-PRO-ORANGE-175","price":80.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/11_4e899c92-ce3a-4c98-9b70-accb221d9d57.png?v=1778169734"},{"product_id":"pla-green-pro-1-75-mm","title":"PLA Green Pro – 1.75 mm","description":"\u003ch3\u003ePLA Green Pro – 1.75 mm\u003c\/h3\u003e\u003cp\u003eGreen PLA Pro is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — the most widely used material in the industry, environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003cp\u003eThe additives in PLA PRO \/ PLA+ \/ Tough PLA make the material about 10°C more heat-resistant and less brittle compared to standard PLA.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Green\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891727941853,"sku":"PLA-PRO-GREEN-175","price":80.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/2-7.png?v=1778169740"},{"product_id":"pla-silver-pro-1-75-mm","title":"PLA Silver Pro – 1.75 mm","description":"\u003ch3\u003ePLA Silver Pro – 1.75 mm\u003c\/h3\u003e\u003cp\u003eSilver PLA Pro is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — the most widely used material in the industry, environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003cp\u003eThe additives in PLA PRO \/ PLA+ \/ Tough PLA make the material about 10°C more heat-resistant and less brittle compared to standard PLA.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Silver\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891728793821,"sku":"PLA-PRO-SILVER-175","price":80.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/16.png?v=1778169766"},{"product_id":"pla-purple-pro-1-75-mm","title":"PLA Purple Pro – 1.75 mm","description":"\u003ch3\u003ePLA Purple Pro – 1.75 mm\u003c\/h3\u003e\u003cp\u003ePurple PLA Pro is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — the most widely used material in the industry, environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003cp\u003eThe additives in PLA PRO \/ PLA+ \/ Tough PLA make the material about 10°C more heat-resistant and less brittle compared to standard PLA.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Purple\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891728826589,"sku":"PLA-PRO-PURPLE-175","price":80.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/13.png?v=1778169775"},{"product_id":"pla-army-green-pro-1-75-mm","title":"PLA Army Green Pro – 1.75 mm","description":"\u003ch3\u003ePLA Army Green Pro – 1.75 mm\u003c\/h3\u003e\u003cp\u003eArmy Green PLA Pro is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — the most widely used material in the industry, environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003cp\u003eThe additives in PLA PRO \/ PLA+ \/ Tough PLA make the material about 10°C more heat-resistant and less brittle compared to standard PLA.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Army Green\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891728859357,"sku":"PLA-PRO-ARMYGREEN-175","price":80.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/PLA-DEEP-GREEN.png?v=1778169779"},{"product_id":"pla-dark-wood-1-75-mm","title":"PLA Dark Wood – 1.75 mm","description":"\u003ch3\u003ePLA Dark Wood – 1.75 mm\u003c\/h3\u003e\u003cp\u003eDark Wood PLA is a PLA blend infused with real wood fiber that prints with a deep, walnut-like color, natural texture, and a subtle wood smell. It can be sanded, stained, and finished much like real wood, making it ideal for decorative pieces, models, and furniture-style prints. Like all PLA, it is not suitable for prolonged outdoor exposure without a protective coating.\u003c\/p\u003e\u003cp\u003eThe base resin is a thermoplastic polymer derived from corn — environmentally friendly and biodegradable. The wood fibers are mildly abrasive: a hardened or steel nozzle is recommended for long print runs, and a slightly larger nozzle (≥0.4 mm) helps avoid clogging.\u003c\/p\u003e\u003cp\u003eWood PLA is rigid but brittle, with a matte finish that hides layer lines well.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – Dark Wood PLA\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 190–220°C (recommended 200°C)\u003c\/li\u003e\n\u003cli\u003eBed temperature: 50–60°C\u003c\/li\u003e\n\u003cli\u003eHardened steel nozzle recommended; ≥0.4 mm preferred to avoid clogs\u003c\/li\u003e\n\u003cli\u003eVary nozzle temp slightly during the print for natural wood-grain shading\u003c\/li\u003e\n\u003cli\u003ePrint speed: slightly slower than standard PLA\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891728892125,"sku":"PLA-WOOD-DARK-175","price":0.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/PLA-1.75-dark-wood.png?v=1778169787"},{"product_id":"pla-pink-pro-1-75-mm","title":"PLA Pink Pro – 1.75 mm","description":"\u003ch3\u003ePLA Pink Pro – 1.75 mm\u003c\/h3\u003e\u003cp\u003ePink PLA Pro is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — the most widely used material in the industry, environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003cp\u003eThe additives in PLA PRO \/ PLA+ \/ Tough PLA make the material about 10°C more heat-resistant and less brittle compared to standard PLA.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Pink\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891728957661,"sku":"PLA-PRO-PINK-175","price":80.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/12.png?v=1778169793"},{"product_id":"pla-turquoise-pro-1-75-mm","title":"PLA Turquoise Pro – 1.75 mm","description":"\u003ch3\u003ePLA Turquoise Pro – 1.75 mm\u003c\/h3\u003e\u003cp\u003eTurquoise PLA Pro is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — the most widely used material in the industry, environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003cp\u003eThe additives in PLA PRO \/ PLA+ \/ Tough PLA make the material about 10°C more heat-resistant and less brittle compared to standard PLA.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Turquoise\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891729154269,"sku":"PLA-PRO-TURQUOISE-175","price":80.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/PLA-1.75-turquoise-PNG.png?v=1778169799"},{"product_id":"pla-skin-pro-1-75-mm","title":"PLA Skin Pro – 1.75 mm","description":"\u003ch3\u003ePLA Skin Pro – 1.75 mm\u003c\/h3\u003e\u003cp\u003eSkin-tone PLA Pro is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — the most widely used material in the industry, environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003cp\u003eThe additives in PLA PRO \/ PLA+ \/ Tough PLA make the material about 10°C more heat-resistant and less brittle compared to standard PLA.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Skin\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891729711325,"sku":"PLA-PRO-SKIN-175","price":80.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/17.png?v=1778169804"},{"product_id":"silk-pla-silver-1-75-mm","title":"Silk PLA Silver – 1.75 mm","description":"\u003ch3\u003eSilk PLA Silver – 1.75 mm\u003c\/h3\u003e\u003cp\u003eSilk PLA Silver is a PLA-based decorative filament with a glossy, silk-like finish. It is intended for visual and model prints, not for functional or load-bearing parts. The material is softer than standard PLA, which makes support removal noticeably easier — though it is also slightly more brittle.\u003c\/p\u003e\u003cp\u003eThe finish comes out beautifully straight off the printer, with no post-processing required. If you need a stronger material that can be sanded and finished, use PLA Pro instead.\u003c\/p\u003e\u003cp\u003eIdeal for vases, cups, jewelry, home decorations, character figures, and any model where a smooth, shimmering surface is desired without visible layer lines.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – Silk PLA Silver\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle: 200°C (up to 210°C on very fast printers) — typically about 10°C lower than PLA Pro\u003c\/li\u003e\n\u003cli\u003eBed: 60°C\u003c\/li\u003e\n\u003cli\u003eSlower print speeds are recommended in most cases\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStorage\u003c\/h4\u003e\u003cp\u003eThe spool ships vacuum-sealed with a desiccant. Once opened, store the filament in a sealed container with a desiccant. Silk PLA absorbs moisture readily — once damp it becomes brittle, hard to print, and the surface quality suffers.\u003c\/p\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891729744093,"sku":"PLA-SILK-SILVER-175","price":100.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/9-1.png?v=1778169813"},{"product_id":"pla-fuchsia-pro-1-75-mm","title":"PLA Fuchsia Pro – 1.75 mm","description":"\u003ch3\u003ePLA Fuchsia Pro – 1.75 mm\u003c\/h3\u003e\u003cp\u003eFuchsia PLA Pro is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — the most widely used material in the industry, environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003cp\u003eThe additives in PLA PRO \/ PLA+ \/ Tough PLA make the material about 10°C more heat-resistant and less brittle compared to standard PLA.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Fuchsia\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891729776861,"sku":"PLA-PRO-FUCHSIA-175","price":80.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/15.png?v=1778169819"},{"product_id":"pla-light-green-pro-1-75-mm","title":"PLA Light Green Pro – 1.75 mm","description":"\u003ch3\u003ePLA Light Green Pro – 1.75 mm\u003c\/h3\u003e\u003cp\u003eLight Green PLA Pro is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — the most widely used material in the industry, environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003cp\u003eThe additives in PLA PRO \/ PLA+ \/ Tough PLA make the material about 10°C more heat-resistant and less brittle compared to standard PLA.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Light Green\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891730039005,"sku":"PLA-PRO-LIGHTGREEN-175","price":80.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/7.png?v=1778169826"},{"product_id":"pla-gold-pro-1-75-mm","title":"PLA Gold Pro – 1.75 mm","description":"\u003ch3\u003ePLA Gold Pro – 1.75 mm\u003c\/h3\u003e\u003cp\u003eGold PLA Pro (solid gold-tone, non-silk) is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — the most widely used material in the industry, environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003cp\u003eThe additives in PLA PRO \/ PLA+ \/ Tough PLA make the material about 10°C more heat-resistant and less brittle compared to standard PLA.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Gold\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891730170077,"sku":"PLA-PRO-GOLD-175","price":80.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/4.png?v=1778169830"},{"product_id":"pla-earth-brown-pro-1-75-mm","title":"PLA Earth Brown Pro – 1.75 mm","description":"\u003ch3\u003ePLA Earth Brown Pro – 1.75 mm\u003c\/h3\u003e\u003cp\u003eEarth Brown PLA Pro is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — the most widely used material in the industry, environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003cp\u003eThe additives in PLA PRO \/ PLA+ \/ Tough PLA make the material about 10°C more heat-resistant and less brittle compared to standard PLA.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Earth Brown\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891730202845,"sku":"PLA-PRO-EARTHBROWN-175","price":80.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/1.png?v=1778169835"},{"product_id":"pla-ice-blue-1-75-mm","title":"PLA Ice Blue – 1.75 mm","description":"\u003ch3\u003ePLA Ice Blue – 1.75 mm\u003c\/h3\u003e\u003cp\u003eIce Blue PLA is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — the most widely used material in the industry, environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Ice Blue\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891730399453,"sku":"PLA-ICEBLUE-175","price":0.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/7-6.png?v=1778169856"},{"product_id":"pla-light-orange-pro-1-75-mm","title":"PLA Light Orange Pro – 1.75 mm","description":"\u003ch3\u003ePLA Light Orange Pro – 1.75 mm\u003c\/h3\u003e\u003cp\u003eLight Orange PLA Pro is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — the most widely used material in the industry, environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003cp\u003eThe additives in PLA PRO \/ PLA+ \/ Tough PLA make the material about 10°C more heat-resistant and less brittle compared to standard PLA.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Light Orange\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891730530525,"sku":"PLA-PRO-LIGHTORANGE-175","price":80.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/8.png?v=1778169871"},{"product_id":"pla-light-yellow-pro-1-75-mm","title":"PLA Light Yellow Pro – 1.75 mm","description":"\u003ch3\u003ePLA Light Yellow Pro – 1.75 mm\u003c\/h3\u003e\u003cp\u003eLight Yellow PLA Pro is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — the most widely used material in the industry, environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003cp\u003eThe additives in PLA PRO \/ PLA+ \/ Tough PLA make the material about 10°C more heat-resistant and less brittle compared to standard PLA.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Light Yellow\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891730563293,"sku":"PLA-PRO-LIGHTYELLOW-175","price":80.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/9.png?v=1778169876"},{"product_id":"silk-pla-white-1-75-mm","title":"Silk PLA White – 1.75 mm","description":"\u003ch3\u003eSilk PLA White – 1.75 mm\u003c\/h3\u003e\u003cp\u003eSilk PLA White is a PLA-based decorative filament with a glossy, silk-like finish. It is intended for visual and model prints, not for functional or load-bearing parts. The material is softer than standard PLA, which makes support removal noticeably easier — though it is also slightly more brittle.\u003c\/p\u003e\u003cp\u003eThe finish comes out beautifully straight off the printer, with no post-processing required. If you need a stronger material that can be sanded and finished, use PLA Pro instead.\u003c\/p\u003e\u003cp\u003eIdeal for vases, cups, jewelry, home decorations, character figures, and any model where a smooth, shimmering surface is desired without visible layer lines.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – Silk PLA White\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle: 200°C (up to 210°C on very fast printers) — typically about 10°C lower than PLA Pro\u003c\/li\u003e\n\u003cli\u003eBed: 60°C\u003c\/li\u003e\n\u003cli\u003eSlower print speeds are recommended in most cases\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStorage\u003c\/h4\u003e\u003cp\u003eThe spool ships vacuum-sealed with a desiccant. Once opened, store the filament in a sealed container with a desiccant. Silk PLA absorbs moisture readily — once damp it becomes brittle, hard to print, and the surface quality suffers.\u003c\/p\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891730628829,"sku":"PLA-SILK-WHITE-175","price":100.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/10-1.png?v=1778169885"},{"product_id":"pla-mint-green-1-75-mm","title":"PLA Mint Green – 1.75 mm","description":"\u003ch3\u003ePLA Mint Green – 1.75 mm\u003c\/h3\u003e\u003cp\u003eMint Green PLA is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — the most widely used material in the industry, environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Mint Green\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891730858205,"sku":"PLA-MINTGREEN-175","price":0.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/5-6.png?v=1778169890"},{"product_id":"pla-hot-pink-1-75-mm","title":"PLA Hot Pink – 1.75 mm","description":"\u003ch3\u003ePLA Hot Pink – 1.75 mm\u003c\/h3\u003e\u003cp\u003eHot Pink PLA is an easy-to-print material, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — the most widely used material in the industry, environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Hot Pink\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891730956509,"sku":"PLA-HOTPINK-175","price":80.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/6-6.png?v=1778169896"},{"product_id":"pla-dark-wood-with-particles-1-75-mm","title":"PLA Dark Wood with Particles – 1.75 mm","description":"\u003ch3\u003ePLA Dark Wood with Particles – 1.75 mm\u003c\/h3\u003e\u003cp\u003eDark Wood PLA with visible wood particles is a PLA blend infused with real wood fiber that prints with pronounced wood grain, deep walnut coloration, and a subtle wood smell. The visible particles produce an authentic, grainy finish that can be sanded, stained, and finished much like real wood. Like all PLA, it is not suitable for prolonged outdoor exposure without a protective coating.\u003c\/p\u003e\u003cp\u003eThe base resin is a thermoplastic polymer derived from corn — environmentally friendly and biodegradable. The wood particles are abrasive and clog-prone: a hardened steel nozzle ≥0.4 mm is strongly recommended.\u003c\/p\u003e\u003cp\u003eWood PLA is rigid but brittle, with a matte, textured finish that hides layer lines well.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – Dark Wood PLA (with particles)\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 190–220°C (recommended 200°C)\u003c\/li\u003e\n\u003cli\u003eBed temperature: 50–60°C\u003c\/li\u003e\n\u003cli\u003eHardened steel nozzle ≥0.4 mm strongly recommended\u003c\/li\u003e\n\u003cli\u003eVary nozzle temp slightly during the print for natural wood-grain shading\u003c\/li\u003e\n\u003cli\u003ePrint speed: slightly slower than standard PLA\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891731087581,"sku":"PLA-WOOD-DARK-PART-175","price":0.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/3-1.png?v=1778169902"},{"product_id":"silk-pla-red-1-75-mm","title":"Silk PLA Red – 1.75 mm","description":"\u003ch3\u003eSilk PLA Red – 1.75 mm\u003c\/h3\u003e\u003cp\u003eSilk PLA Red is a PLA-based decorative filament with a glossy, silk-like finish. It is intended for visual and model prints, not for functional or load-bearing parts. The material is softer than standard PLA, which makes support removal noticeably easier — though it is also slightly more brittle.\u003c\/p\u003e\u003cp\u003eThe finish comes out beautifully straight off the printer, with no post-processing required. If you need a stronger material that can be sanded and finished, use PLA Pro instead.\u003c\/p\u003e\u003cp\u003eIdeal for vases, cups, jewelry, home decorations, character figures, and any model where a smooth, shimmering surface is desired without visible layer lines.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – Silk PLA Red\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle: 200°C (up to 210°C on very fast printers) — typically about 10°C lower than PLA Pro\u003c\/li\u003e\n\u003cli\u003eBed: 60°C\u003c\/li\u003e\n\u003cli\u003eSlower print speeds are recommended in most cases\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStorage\u003c\/h4\u003e\u003cp\u003eThe spool ships vacuum-sealed with a desiccant. Once opened, store the filament in a sealed container with a desiccant. Silk PLA absorbs moisture readily — once damp it becomes brittle, hard to print, and the surface quality suffers.\u003c\/p\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891731218653,"sku":"PLA-SILK-RED-175","price":100.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/4-2.png?v=1778169926"},{"product_id":"pla-yellow-cream-1-75-mm","title":"PLA Yellow Cream – 1.75 mm","description":"\u003ch3\u003ePLA Yellow Cream – 1.75 mm\u003c\/h3\u003e\u003cp\u003eYellow Cream PLA is an easy-to-print material in a soft cream-yellow tone, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Yellow Cream\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891731480797,"sku":"PLA-YELLOWCREAM-175","price":0.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/1-10.png?v=1778169955"},{"product_id":"pla-peach-orange-yellow-1-75-mm","title":"PLA Peach Orange Yellow – 1.75 mm","description":"\u003ch3\u003ePLA Peach Orange Yellow – 1.75 mm\u003c\/h3\u003e\u003cp\u003ePeach Orange Yellow PLA is an easy-to-print PLA in a warm peach-orange-yellow tone, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Peach Orange Yellow\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891731874013,"sku":"PLA-PEACH-OY-175","price":0.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/3-9.png?v=1778169977"},{"product_id":"pla-lavender-1-75-mm","title":"PLA Lavender – 1.75 mm","description":"\u003ch3\u003ePLA Lavender – 1.75 mm\u003c\/h3\u003e\u003cp\u003eLavender PLA is an easy-to-print material in a soft pale-purple tone, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Lavender\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891731939549,"sku":"PLA-LAVENDER-175","price":0.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/PLA-Lavender.png?v=1778169988"},{"product_id":"pla-galaxy-blue-1-75-mm","title":"PLA Galaxy Blue – 1.75 mm","description":"\u003ch3\u003ePLA Galaxy Blue – 1.75 mm\u003c\/h3\u003e\u003cp\u003eGalaxy Blue PLA is a sparkling PLA infused with fine glitter \/ mica particles that catch the light like a starry night sky. Stunning for showpieces, dice, jewelry, and any model where a premium decorative look is desired. Like all PLA, it is not suitable for prolonged outdoor exposure without a protective coating.\u003c\/p\u003e\u003cp\u003eThe base resin is a thermoplastic polymer derived from corn — environmentally friendly and biodegradable. The sparkle particles are mildly abrasive: a hardened or steel nozzle is recommended for long print runs.\u003c\/p\u003e\u003cp\u003eGalaxy PLA is rigid but brittle, with a deep blue color and distinctive shimmer that hides layer lines well.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Galaxy Blue\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 200–225°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eHardened steel nozzle recommended for long runs\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891732562141,"sku":"PLA-GALAXY-BLUE-175","price":0.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/PLA-Galaxy-Blue.jpg?v=1778170020"},{"product_id":"pla-galaxy-nebula-purple-1-75-mm","title":"PLA Galaxy Nebula Purple – 1.75 mm","description":"\u003ch3\u003ePLA Galaxy Nebula Purple – 1.75 mm\u003c\/h3\u003e\u003cp\u003eGalaxy Nebula Purple PLA is a sparkling PLA infused with fine glitter \/ mica particles that catch the light like a deep-space nebula. Stunning for showpieces, dice, jewelry, and any model where a premium decorative look is desired. Like all PLA, it is not suitable for prolonged outdoor exposure without a protective coating.\u003c\/p\u003e\u003cp\u003eThe base resin is a thermoplastic polymer derived from corn — environmentally friendly and biodegradable. The sparkle particles are mildly abrasive: a hardened or steel nozzle is recommended for long print runs.\u003c\/p\u003e\u003cp\u003eGalaxy PLA is rigid but brittle, with a deep purple color and distinctive shimmer that hides layer lines well.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Galaxy Nebula Purple\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 200–225°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eHardened steel nozzle recommended for long runs\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891733119197,"sku":"PLA-GALAXY-PURPLE-175","price":0.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/PLA-Galaxy-Nebula-Purple.png?v=1782996073"},{"product_id":"pla-brown-marble-1-75-mm","title":"PLA Brown Marble – 1.75 mm","description":"\u003ch3\u003ePLA Brown Marble – 1.75 mm\u003c\/h3\u003e\u003cp\u003eBrown Marble PLA is a PLA blend infused with stone-like mineral particles that prints with an authentic marble appearance — natural veining, irregular speckles, and a slightly rough, stony texture. Ideal for vases, sculptures, busts, and architectural prints where a natural-stone look is desired. Like all PLA, it is not suitable for prolonged outdoor exposure without a protective coating.\u003c\/p\u003e\u003cp\u003eThe base resin is a thermoplastic polymer derived from corn — environmentally friendly and biodegradable. The mineral particles are mildly abrasive: a hardened or steel nozzle is recommended for long print runs.\u003c\/p\u003e\u003cp\u003eMarble PLA is rigid but brittle, with a textured matte finish that hides layer lines extremely well.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Brown Marble\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eHardened steel nozzle recommended; ≥0.4 mm preferred\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891733577949,"sku":"PLA-MARBLE-BROWN-175","price":120.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/4-1.png?v=1778170064"},{"product_id":"pla-galaxy-black-1-75-mm","title":"PLA Galaxy Black – 1.75 mm","description":"\u003ch3\u003ePLA Galaxy Black – 1.75 mm\u003c\/h3\u003e\u003cp\u003eGalaxy Black PLA is a sparkling PLA infused with fine glitter \/ mica particles that catch the light like a starry night sky against a deep black base. Stunning for showpieces, dice, jewelry, and any model where a premium decorative look is desired. Like all PLA, it is not suitable for prolonged outdoor exposure without a protective coating.\u003c\/p\u003e\u003cp\u003eThe base resin is a thermoplastic polymer derived from corn — environmentally friendly and biodegradable. The sparkle particles are mildly abrasive: a hardened or steel nozzle is recommended for long print runs.\u003c\/p\u003e\u003cp\u003eGalaxy PLA is rigid but brittle, with a deep black base and distinctive shimmer that hides layer lines well.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Galaxy Black\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 200–225°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eHardened steel nozzle recommended for long runs\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891734659293,"sku":"PLA-GALAXY-BLACK-175","price":0.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/Untitled-design-1.png?v=1778170070"},{"product_id":"pla-coral-1-75-mm","title":"PLA Coral – 1.75 mm","description":"\u003ch3\u003ePLA Coral – 1.75 mm\u003c\/h3\u003e\u003cp\u003eCoral PLA is an easy-to-print material in a warm coral \/ salmon-pink tone, easy to process (finishing), rigid, and not suitable for outdoor conditions (unless sufficiently thick finishing materials are applied). It is the most common material for printing due to its ease of use and low cost.\u003c\/p\u003e\u003cp\u003eIt is a thermoplastic polymer based on corn — environmentally friendly and biodegradable, and the preferred material because it allows easier post-processing.\u003c\/p\u003e\u003cp\u003ePLA is rigid but brittle. In outdoor conditions, corners may deform depending on thickness and temperature; a full automotive-grade coating can make it suitable for outdoor use.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Coral\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 195–220°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor very large prints (~100 hours), add glue to the bed and reduce bed temperature\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891735838941,"sku":"PLA-CORAL-175","price":80.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/8-4.png?v=1778170085"},{"product_id":"pla-galaxy-red-1-75-mm","title":"PLA Galaxy Red – 1.75 mm","description":"\u003ch3\u003ePLA Galaxy Red – 1.75 mm\u003c\/h3\u003e\u003cp\u003eGalaxy Red PLA is a sparkling PLA infused with fine glitter \/ mica particles that catch the light like glowing embers. Stunning for showpieces, dice, jewelry, and any model where a premium decorative look is desired. Like all PLA, it is not suitable for prolonged outdoor exposure without a protective coating.\u003c\/p\u003e\u003cp\u003eThe base resin is a thermoplastic polymer derived from corn — environmentally friendly and biodegradable. The sparkle particles are mildly abrasive: a hardened or steel nozzle is recommended for long print runs.\u003c\/p\u003e\u003cp\u003eGalaxy PLA is rigid but brittle, with a deep red color and distinctive shimmer that hides layer lines well.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – PLA Galaxy Red\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle temperature: 200–225°C\u003c\/li\u003e\n\u003cli\u003eBed temperature: 60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle working temperature: 210°C\u003cul\u003e\u003cli\u003eIf using a non-steel nozzle, increase by ~10°C\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eHardened steel nozzle recommended for long runs\u003c\/li\u003e\n\u003cli\u003eFans: 100%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891737673949,"sku":"PLA-GALAXY-RED-175","price":120.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/Galaxy-Red-PLA.jpg?v=1778170124"},{"product_id":"silk-pla-blue-1-75-mm","title":"Silk PLA Blue – 1.75 mm","description":"\u003ch3\u003eSilk PLA Blue – 1.75 mm\u003c\/h3\u003e\u003cp\u003eSilk PLA Blue is a PLA-based decorative filament with a glossy, silk-like finish. It is intended for visual and model prints, not for functional or load-bearing parts. The material is softer than standard PLA, which makes support removal noticeably easier — though it is also slightly more brittle.\u003c\/p\u003e\u003cp\u003eThe finish comes out beautifully straight off the printer, with no post-processing required. If you need a stronger material that can be sanded and finished, use PLA Pro instead.\u003c\/p\u003e\u003cp\u003eIdeal for vases, cups, jewelry, home decorations, character figures, and any model where a smooth, shimmering surface is desired without visible layer lines.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – Silk PLA Blue\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle: 200°C (up to 210°C on very fast printers) — typically about 10°C lower than PLA Pro\u003c\/li\u003e\n\u003cli\u003eBed: 60°C\u003c\/li\u003e\n\u003cli\u003eSlower print speeds are recommended in most cases\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStorage\u003c\/h4\u003e\u003cp\u003eThe spool ships vacuum-sealed with a desiccant. Once opened, store the filament in a sealed container with a desiccant. Silk PLA absorbs moisture readily — once damp it becomes brittle, hard to print, and the surface quality suffers.\u003c\/p\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891738460381,"sku":"PLA-SILK-BLUE-175","price":0.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/8-1.png?v=1778170137"},{"product_id":"silk-pla-pink-1-75-mm","title":"Silk PLA Pink – 1.75 mm","description":"\u003ch3\u003eSilk PLA Pink – 1.75 mm\u003c\/h3\u003e\u003cp\u003eSilk PLA Pink is a PLA-based decorative filament with a glossy, silk-like finish. It is intended for visual and model prints, not for functional or load-bearing parts. The material is softer than standard PLA, which makes support removal noticeably easier — though it is also slightly more brittle.\u003c\/p\u003e\u003cp\u003eThe finish comes out beautifully straight off the printer, with no post-processing required. If you need a stronger material that can be sanded and finished, use PLA Pro instead.\u003c\/p\u003e\u003cp\u003eIdeal for vases, cups, jewelry, home decorations, character figures, and any model where a smooth, shimmering surface is desired without visible layer lines.\u003c\/p\u003e\u003ch4\u003ePrinting Temperature – Silk PLA Pink\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNozzle: 200°C (up to 210°C on very fast printers) — typically about 10°C lower than PLA Pro\u003c\/li\u003e\n\u003cli\u003eBed: 60°C\u003c\/li\u003e\n\u003cli\u003eSlower print speeds are recommended in most cases\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStorage\u003c\/h4\u003e\u003cp\u003eThe spool ships vacuum-sealed with a desiccant. Once opened, store the filament in a sealed container with a desiccant. Silk PLA absorbs moisture readily — once damp it becomes brittle, hard to print, and the surface quality suffers.\u003c\/p\u003e","brand":"Dimensions 3D","offers":[{"title":"Default Title","offer_id":47891740164317,"sku":"PLA-SILK-PINK-175","price":100.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/2961\/0205\/files\/Untitled-design-2.png?v=1778170174"}],"url":"https:\/\/www.dimensions3d.shop\/collections\/materials.oembed","provider":"Dimensions_48","version":"1.0","type":"link"}